Want KitKat on your S3?: root tutorial for Galaxy S3 on Android 4.3

With the rather unfortunate announcement from Samsung last week that the kitKat update list will be dropping the international version of the Galaxy S3, the 3G-only GT-I9300, I thought it might be a good time to share a root tutorial for the S3 so you can take the first steps towards entering the brave new world of flashing custom ROMs, which will have you running a KitKat-based ROM for the S3 lickety-split.

So Samsung has left you out in the cold? No problem. Take matters into your own hands. / © T

Warning: 

Rooting and flashing ROMs does come with risks, but considering Samsung isn't supporting your device any longer and it is more than likely out of warranty, unless you really can't afford to get a new device if something goes terribly amiss, you should be fine. Just follow the steps outlined below carefully, and if you're not sure, do not proceed until you get some clarification. If you use Knox, have a read of this Samsung post about how Knox interacts with the root tool used in this tutorial first. 

What you need:

Unlocked Galaxy S3 GT-I9300 (international 3G model, no carrier branding)

Stock Samsung Android 4.3

Odin v3.09

CF-Auto-Root

There's still plenty of life left in the Galaxy S3, especially with KitKat. / © Samsung

1. Make sure you have the relevant drivers for the Galaxy S3 installed on your computer (should happen automatically the first time you plug in with a USB cable) and that you have USB Debugging enabled in the Developer Options. To get this mode in your settings, if you don't already have it, go to Settings > About Phone > Build Number and tap it seven times until the toast pops up announcing you have enabled Developer Options. Make sure you have plenty of battery too, preferably over 80% just to be sure.

2. Do a backup of all the important data on your device. I repeat, do a backup of all the important data you want to restore. It's better to be safe than sorry.

3. Turn off your S3 and restart in Download Mode. Do this by pressing and holding Volume Down, Home and Power until you see the triangle warning screen. Press Volume Up to enter Download Mode.

CF-Auto-Root comes with Odin v3.07 in the zip, but you'll want to download v3.09 separately. / © T

4. Extract the two files above (Odin and CF-Auto-Root), put Odin in the same folder as the unpacked Auto-Root files and launch Odin.

5. Connect your S3 in Download Mode to your PC with a USB cable and wait until it is recognized by Odin (the ID: COM box will turn blue).

Once your device is recognized by Odin you'll see the ID:COM box turn blue. / © AndroidPIT

6. Click the AP box and locate the tar.md5 file in the unpacked CF-Auto-Root files.

Click AP and locate the tar.md5 file in the unpacked CF-Auto-Root files. / © T

7. Make sure Repartition is not checked. Auto Reboot and F. Reset Time are OK though.

8. Click Start and sit back and wait. Do not disconnect your S3 and do not panic. This step can take a while.

9. If you kept Auto Reboot checked in Odin your S3 will reboot. If you didn't keep it checked, manually reboot your phone now. You should see a Pass message displayed in Odin.

10. Disconnect your S3 from your PC. You should now have the SuperSU app installed on your S3.

Install Root Checker from the Play Store link below and grant it superuser privileges. Run the app and confirm that you now have root access. Next step is to find yourself a nice KitKat ROM for the Galaxy S3.

Root CheckerINSTALL